Hey eddie, its not too hard to set up an L3+ antminer. You have to join a pool to get the best payback. I use the AntPool, just out of ease. The main thing you have to do is get rid of the heat. Each antminer pumps out +2500 Btu/hour of heat. I bought 120mm fan couplings and bolted them on the back of the miner, and ran insulated duct into a box that had an exhaust fan to the outside. Problem with that is you have to have the same amount of makeup air that is a decent temperature being pumped inside to replace what heated air you pumped outside. Right now with 9 antminers you should pull in about 1.5 LTC per day. setup your antminers into an Ethernet switch with a static IP address, and address them to your pool username(dot)XX. The XX would be a number. Number each miner 01 through 09. Lets say on a pool, you use the login name “edereszynski” your first miners “worker” name would be “edereszynski.01” second miner worker name would be “edereszynski.02” and so on. Make sure you name your miners the same as the pool, so you get paid for the hash power it delivers.